wire drawing的例句大全

Sales: screen; Nails; Wire drawing ; Metal products; Tech windows.

销售: 丝网; 铁钉; 拔丝; 五金制品; 塑钢门窗.

Metal wire drawing process, with slip design article!

金属拉丝工艺, 带防滑条设计!

An automatic control system of ARM-based wire drawing machine is introduced.

介绍了一种基于ARM的拉丝机自动控制系统.

This paper discusses some problems encunteredinthe production of wire drawing steel Q 195 Lat XinyuIronand Steel Co.

介绍新余钢铁有限责任公司在生产Q195L拉丝用钢中存在的主要问题.

Continuous coiler is used to get the non-stop production in a wire drawing plant.

连续缠 卷装置 令拉丝工厂生产连贯.

The category and function of the copper wire drawing lubricant are presented.

本文介绍了铜拉丝润滑剂的种类、作用、对拉线的影响因素及质量要求.

The phenomenon of wire diameter shrinkage is a common defect in continuous wire drawing.

“缩径”现象是钢丝在连续拉拔过程中常见的一种缺陷.

For Wire drawing, mesh production, Packing and strapping, springs production, thin wire and steel ropes production.

因为电线图画, 网孔制造, 包装和皮绳或皮带的材料, 春天制造, 使电线变薄而且使粗绳制造坚如钢.

We produce the annealed wire with high-quality low carbon raw materials through wire drawing, anneal process.

镀锌铁丝采用中低碳钢盘条为原材料, 按生产工艺可分为热镀铁丝和电镀铁丝.

Debase drawing force of T7 steel wire obviously and increase tensile strength, and increase specific elongation slightly;

显著降低T7钢丝的拉拔力，提高抗拉强度，并使其延伸率稍微增加；

The influence of recovery on the cold-drawing process and mechanical properties hot-rolled-controlled-cooling dual-phase wire was investigated.

研究了回复对热轧 - 控冷双相钢丝拉拔工艺及力学性能的影响.

Wire breaking appears owing to unsuitable drawing process parameters when SWRH 82 B rod is drawn.

SWRH82B线材在拉拔时由于拉拔工艺参数不当出现断丝.

Analyses of Cause for Die Screaming and Cross Crackles in PC Steel Wire Drawing

PC钢丝拉拔叫模及横裂原因分析

Hot galvanized iron wire: The product structure of-quality carbon steel, the drawing, from hot-dip galvanizing process.

热镀锌丝: 该产品应用优质碳素结构钢, 经拉拔 、 热镀锌加工而成.

Series of low-carbon should insist the suited and logical principle between strength and toughness. During drawing steel wire, increasing hard percentage elongation and against bendability target on the premise of ensuring strength.

低碳系列棉花打包丝应坚持强度和韧性合理匹配的原则，钢丝制造过程中在保证强度的前提下应努力提高延伸率和反弯指标。

Development and Application of the Wire Drawing Die of TZP Ceramics

TZP陶瓷拉丝模的开发与应用

By Cr microalloying, the fore eutectoid ferrite eduction is restrained, the distance between rows of pearlite is decreased, then the tensile strength, section shrinkage and drawing property of high carbon steel wire rod is obviously raised and improved.

高碳钢中加入的铬元素抑制先共析铁素体析出，减小珠光体片层间距，可明显提高抗拉强度，提高断面收缩率，改善线材的拉拔性能。

Paper thinly bing drawing, the level of uniformity, long thin wire, suitable for hot food.

拉丝烙饼皮极薄, 层次均匀, 丝细绵长, 宜于热吃.

Fabrication of Steel Fiber Reinforced Copper Base Composite Wire Using Bundle-Drawing Technology

集束拉拔法制备钢纤维增强铜基复合导线

A file exchange interface programming system is presented, which can automatically translate text file of profile coordinates or drawing file of profile to the file used by wire cut EDM directly.

通过自动编程系统将设计系统生成的齿廓坐标文件或图形文件直接转换成线切割加工文件（3B格式），可实现非圆齿轮的自动编程加工。